«OSK GROUP» 3M™ Novec 1230 Fire Protection Fluid
  Russian  
+7 495 785 55 01
3M™ Novec™ 1230 Fire Protection Fluid
Properties of 3M Novec 1230
3M™ Novec™ 1230 Fire Protection Fluid

Properties of 3M Novec 1230

3M™ Novec™ 1230 Fire Protection Fluid
Home  »  Novec™ 1230  »  What is 3M Novec 1230?  »  Properties of 3M Novec 1230

3M Novec 1230 Fire Protection Fluid is applied as a gas, but is a liquid at room temperature.

It is non-conductive in both its liquid and gaseous state. The breakdown voltage of Novec 1230 vapours in saturation conditions at 1atm, 21 °C, with over a 2.7 mm electrode gap, is 48 kW, which is nearly 2.3 times that of dry nitrogen.

Properties of 3M™ Novec™ 1230


The properties of 3M Novec 1230 Fire Protection Fluid are similar to many of the first generation halon alternatives with one primary exception - it is a liquid at room temperature. The boiling point of Novec 1230 Fire Protection Fluid is 49.2 °C, which means it has a much lower vapour pressure than any other clean agents which are gases at room temperature.

Properties of 3M™ Novec™ 1230


Novec 1230 Fire Protection Fluid does not reduce the temperature in the area during suppression by more than 2-4 °C, which is extremely important for IT industry.

Chemical formula CF3CF2C(0)CF(CF3)2
Molecular weight 316. 04 
Boiling point at 1atm49.2°C 
Freezing point-108.0°C 
Density, liquid saturation1.60 g/ml
Density, gas at 1 atm0.0136 g/ml 
Specific volume at 1 atm0.0733 m3/kg
Specific heat, liquid 1.103kJ/kg°C
Specific heat, vapour at 1 atm0.891 kJ/kg°C 
Heat of vaporisation at boiling point 88.0 kJ/kg
Liquid viscosity at 0°C/25°C0.56/0.39 centistokes
Vapour pressure 0.404 bar 
Relative dielectric strength at 1 atm (N2=1.0): 2.3 


 3M Novec 1230 Fire Protection Fluid

Place an order

 


© OSK GROUP, Fire Protection Systems, phone: +7-495-785-55-01

Place an order